QuickFeather Development Board

Copyright (c) 2019-2024 Antmicro

Overview

This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform. The design files were created by Antmicro in cooperation with QuickLogic. The board has been designed to keep compatibility with the Adafruit Feather ecosystem of evaluation boards. This allows the user to explore functionalities of the EOS S3 platform.

Project structure:

The main directory contains the KiCad design files, LICENSE and README. The remaining files are stored in the following directories:

• img - contains graphics for this README
• doc - contains generated schematics and other documentation
• lib - contains KiCad component library

Key features

• QuickLogic EOS S3 Processing Platform
• mCube MC3635 accelerometer
• Infineon DPS310 pressure sensor
• Infineon IM69D130 MEMS microphone
• 16Mbit of on-board flash memory
• User button and RGB LED
• Powered from USB or a single Li-Po battery
• Integrated battery charger
• USB data signals tied to programmable logic
• IO signals break-routed into general purpose pinheads
• Compatible with standard 0.1" breadboards

Development ecosystem

Simulation

The board is supported in Renode, the open source simulation framework by Antmicro - you can run a virtual copy of this hardware for software development purposes on your PC. A link to the relevant demo script is provided in Renode's supported boards section.

License

This project is licensed under the CC BY-SA 4.0 DEED license.