Data Center RDIMM DDR5 Tester
This project contains open hardware KiCad design files for an experimental, FPGA-based platform for interfacing with RDIMM DDR5 RAM modules. The latest design revision (Rev.2.x) features an AMD Artix UltraScale Plus FPGA. The design files are now being verified with a small series of prototypes. The previous revision (Rev.1.x) was built around an AMD (Xilinx) Kintex-7 FPGA and the design files were verified with prototypes. This hardware DDR5 testing platform integrates with the open source Rowhammer Tester project.
Languages
Data Center RDIMM DDR5 Tester
Copyright (c) 2021-2024 Antmicro
Overview
This project contains open hardware KiCad design files for an experimental, FPGA-based platform for interfacing with RDIMM DDR5 RAM modules. The latest design revision (Rev.2.x) features an AMD Artix UltraScale Plus FPGA. The design files are now being verified with a small series of prototypes. The previous revision (Rev.1.x) was built around an AMD (Xilinx) Kintex-7 FPGA and the design files were verified with prototypes. This hardware DDR5 testing platform integrates with the open source Rowhammer Tester project.
Project structure
The main repository directory contains KiCad PCB project files, a LICENSE and README. The remaining files are stored in the following directories:
doc- contains PDF schematicsassets- contains visual assets for showcasing this design on Open Hardware Portal.
Key features
- Artix Ultrascale plus FPGA (AU25P)
- RDIMM DDR5 memory slot
- PCIe 8x Edge connector
- HDMI output connector
- Ethernet RJ45 connector with 1GbE transceiver
- USB-C debug connector with FT4232HQ FTDI USB controller
- JTAG connector
- microSD card slot
- 16 MBytes S25FL128S QSPI FLASH memory
- IS66WVH16M8DBLL HyperRAM
- External 7-15V DC power input
License
This project is published under the Apache-2.0 license.
Relevant projects
Nothing found
Apologies, but no results were found.